Вход

Supplement Facts Label Maker

This supplement facts label maker turns your formula into an FDA Supplement Facts panel, the ingredients in order and every % Daily Value worked out, as a print-ready file.

  • FDA’s nine panel examples
  • Daily Values worked out
  • Checks with their paragraphs
  • Free PDF, SVG, EPS and PNG

Supplement Facts Label Maker

panel layouts to start from
10
dietary ingredients in FDA order
45
file types: PDF, SVG, EPS and PNG
4
displays: standard, split and linear
3

How to use this supplement facts label maker

Seven steps take a formula from an empty box to a file your printer can use, and the supplement facts label maker checks the panel as you go.

Start fromFDA example i

A supplement facts generator that shows its work

A Supplement Facts panel is a small box with a long list of rules behind it. This supplement facts label generator applies them line by line and cites the paragraph behind every check.

Dietary ingredients in the order of 101.36(b)(2)(i)(B)

You enter

Biotin3 mcg
Calcium130 mg
Vitamin C90 mg

On the label

Vitamin C100%
Biotin10%
Calcium10%

21 CFR 101.36(b)(2)(i)(B)

Dietary ingredients in FDA order

Type biotin before vitamin C or calcium before iron: the panel still lists the vitamins, minerals and macronutrients in FDA’s order, with calcium and iron after choline. Other dietary ingredients follow below the heavy bar, in the order you give them.

Total Carbohydrate1 g<1%*
Vitamin C60 mg67%
Vitamin B126 mcg250%

101.36(b)(2)(iii)(C): nearest whole percent, <1% below one percent.

% Daily Value worked out, never typed

Every percent comes from the amount and its Daily Value, rounded to the nearest whole percent, with <1% under one percent: biotin at 3 mcg is 10% and riboflavin at 60 mg is 4615%. Vitamins, minerals and other ingredients keep the decimals you type, so 2.0 mcg stays 2.0 mcg, while calories and macronutrients round to FDA’s increments.

† The regulation asks for a symbol (for example an asterisk); this tool uses † by default, with "Daily Value not established."

Ingredients with no Daily Value

Herbs, amino acids and other dietary ingredients have no Daily Value, so their percent cell takes a symbol, † by default, and the footnote Daily Value not established. The symbol, the footnote and the heavy bar above these ingredients come with the panel.

101.36(c): the blend’s total weight, its ingredients in descending order by weight, no amounts of their own.

Proprietary blends

A proprietary blend gets its own name and total weight per serving, with its ingredients indented underneath and no amounts of their own. The checks ask for the total weight and the ingredient list before the panel is done.

  • PDFvector, outlined text, 100% K
  • SVGvector, outlined text, RGB
  • EPSvector, outlined text, 100% K
  • PNG300 or 600 dpi

Files ready for the printer

The PDF, SVG and EPS are vector with the text as outlines, so the printer needs no fonts. The PDF and EPS print black as 100% K, the SVG is RGB, and the PNG is 300 or 600 dpi at the panel’s print size.

What a Supplement Facts panel carries

A Supplement Facts panel is the nutrition information panel of a dietary supplement, set out in 21 CFR 101.36. It opens with the words Supplement Facts in bold, larger than every other line and as wide as the panel, inside the hairline box that holds the whole panel (101.36(e)(1) and (e)(2)). Serving Size sits under the title, followed by Servings Per Container unless the net quantity statement gives it (101.36(b)(1)(ii)), and the amount and % Daily Value headings sit under a heavy bar with a light bar beneath them (101.36(e)(7)).

The (b)(2) dietary ingredients come first, in the order of 101.36(b)(2)(i)(B), each % Daily Value rounded to the nearest whole percent (101.36(b)(2)(iii)(C)). A heavy bar closes that list, and the other dietary ingredients follow with a symbol and the footnote that explains it (101.36(b)(3)). A proprietary blend keeps its ingredients under its own name and total weight (101.36(c)), a source sits in parentheses after the name (101.36(d)), and a package with less than 12 square inches of label area may use 4.5 point type (101.36(i)(2)(i)). FDA’s high-resolution examples show the nine layouts this supplement facts label maker starts from.

Servings Per Container under Serving Size; the title inside the box, larger than every other line. 21 CFR 101.36(e)(1)

The order this supplement facts label maker uses

The dietary ingredients follow the order of the Nutrition Facts label, not the order you type them: calories first, then the fats, cholesterol, carbohydrate, fiber, sugars and protein, then the vitamins and minerals in FDA’s own list, where sodium and potassium follow chloride. The panel sorts the rows as you go, so a formula sheet can be typed as it is written. Added sugars sits under total sugars, so the panel asks for total sugars whenever added sugars is on it.

Daily Values and rounding in this supplement facts label generator

Each % Daily Value is the amount per serving over its Daily Value, the RDI or the DRV FDA sets. Calories leave the percent cell blank, and fats, cholesterol, sodium, potassium, carbohydrate and fiber take their percent from the amount as printed, so the supplement facts label generator never shows a percent that disagrees with its own amount. An amount under one percent prints as <1%, as FDA’s children’s example prints for 1 g of carbohydrate.

The calorie statements appear only when the panel has a calorie nutrient to explain, and the diet in each statement follows the age group of its column. Vitamin D may show IU after the mcg amount, and folate shows its folic acid in parentheses when folic acid is added.

Columns and displays in the supplement facts generator

The per day column multiplies each amount by the servings taken in a day and prints that number in its heading, as in Per Day (3 Caplets). Two products give an AM and a PM packet their own amount and % Daily Value columns, and two % Daily Value columns set the children 1 through 3 panel beside the adult one, and each heading gets its audience words for you.

In the linear display the panel runs as one paragraph at 8 pt, or 4.5 pt with the small package switch, inside its box. The standard and split displays draw every rule: a hairline between ingredients, a light bar under the headings and heavy bars closing the servings and each group. All three keep the same order, percents and footnotes.

Sources, other ingredients and print files

A salt or an extract takes its source in parentheses after the ingredient name, starting with as or from: Vitamin C (as ascorbic acid), Calcium (from oyster shell). A plant part follows the name instead, as Oriental Ginseng, powdered (root). The other ingredients, the gelatin, water, cellulose and the like, print below the panel, as in FDA’s examples; type that statement once and it travels with the design.

Each file is the panel at its print size. Put on a label sends the same design to the food label maker, where the product name, the words Dietary Supplement, a net quantity as a count and the business address sit around the panel, sized so they fit.

Who uses a supplement facts label maker

The panel is the same regulation for a one-person brand and a contract manufacturer, and the supplement facts label generator fits both.

A first supplement

A small brand with one capsule formula types the ingredients from its formula sheet, checks the percents and downloads a panel for its first print run.

A contract manufacturer’s customer

A brand that buys a stock formula enters the amounts the manufacturer supplies. The panel works out the Daily Values, and the checks catch a missing amount or a blend without its total weight before the file goes to print.

A label that needs a second column

A packet with an AM and a PM formula, or a product for children and adults, needs more than one column. The supplement facts label maker sets two products or two Daily Value columns and names each one on a single panel.

Supplement Facts label maker questions

What the tool does with the amounts, the Daily Values and the files it makes.

Start the label maker

Does this supplement facts label maker work out the % Daily Value?

Yes. Type the amount per serving and the panel works out each percent from the Daily Value (the RDI in 21 CFR 101.9(c)(8)(iv) or the DRV in 101.9(c)(9)), rounded to the nearest whole percent, with <1% for an amount under one percent. You never type a percent, so the number and the percent always agree.

Can I make a panel with a proprietary blend?

Yes. Add a proprietary blend with its total weight per serving and list its ingredients in descending order by weight. The panel indents them under the blend’s name and weight, with the symbol in their % Daily Value cells.

What does the † symbol mean on a Supplement Facts panel?

It marks a dietary ingredient with no Daily Value, such as an herb or an amino acid, and the footnote under the panel explains it: Daily Value not established. The tool adds both for you.

Can the panel show a per day column or two products?

Yes. The Columns setting adds a per day column with the servings a day in its heading, a column for each of two products such as an AM and a PM packet, or two % Daily Value columns for children 1 through 3 and everyone 4 or older.

Is the file ready for a printer?

Yes. Each file is the panel at its print size with the text outlined, so the printer needs no fonts. Every file is free, with no signup or watermark.

Does the tool keep my design?

Yes. The page saves the design in your browser as you work, under its own key, so a Nutrition Facts design from the nutrition label generator stays as it is. You can also save a design to your account or download a project file.

Make your Supplement Facts panel

Type the formula, pick the columns and download a print-ready panel from this supplement facts label maker.