Sign In

Sublimation Mug Template for Mugs and Tumblers

Type how wide and how tall your mug is, and this mug template draws the wrap that fits it: the right length round, the strip at the handle left bare, and the front in the middle, opposite the handle.

  • 9 mugs and tumblers
  • Handle gap worked out
  • Mirrored PNG
  • Tapered tumbler arcs

Mug Template

Print at 100% and check the 1 in square with a ruler before you press.

ready mugs and tumblers, 11 to 40 oz
9
wrap of the 11 oz mug
8.5 × 3.5 in
left bare at the 11 oz mug’s handle
1.56 in
PNG, as is or mirrored
300 dpi

How to make a mug template in four steps

Four steps take you from a blank mug on the table to a sublimation mug template that wraps it edge to edge.

Start from a template
  • 11 oz mug8.5 × 3.5 in
  • 15 oz mug9 × 4 in
  • 12 oz enamel mug7.75 × 2.4 in
  • 20 oz skinny tumbler9.12 × 8.13 in
  • 20 oz tapered tumbler8.87 × 8.13 in
  • 30 oz skinny tumbler9.96 × 9.5 in

A mug template worked out from your mug

Every wrap here comes from the sizes you type, so your design meets the handle where you want it and nowhere else.

Round the mug 10.06 in

Wrap 8.5 in

Left at the handle 1.56 in

The wrap is the mug’s round less the strip at the handle; its middle, dashed, is the front.

The handle gap, worked out

A mug is round, but its handle takes a strip you can’t press. The wrap is the mug’s round less that gap, and its middle is the front, opposite the handle. On the 11 oz mug that is 10.06 in round, an 8.5 in wrap and 1.56 in left bare.

Front
Back, the handle on the left

The 11 oz mug in 3D: the wrap round its body, its ends either side of the handle.

See the mug in 3D, handle and all

The 3D view wraps your design round the mug’s body with the handle at the side, so you can turn the mug and see where each word lands before you print.

20 oz skinny tumbler9.12 × 8.13 in
20 oz tapered tumbler9.25 × 8.23 in

A straight tumbler’s wrap is a rectangle; a tapered one’s is an arc.

Straight and tapered tumblers

A straight skinny tumbler takes a rectangle as long as it is round. A tapered one is a slice of a cone, so its wrap is an arc worked out from the top, the bottom and the height, and lies flat round the tumbler without wrinkles.

As is
Mirrored

Transfer paper goes on face down: print it mirrored and the words read right on the mug.

A mirrored PNG for transfer paper

Sublimation transfer paper goes on the mug face down, so the print has to be mirrored. Pick Mirrored and the 300 dpi PNG comes flipped left to right, ready for your sublimation printer.

40 oz tumbler top12.57 × 5.81 in
40 oz tumbler bottom10.18 × 4.04 in

A 40 oz handled tumbler takes two wraps: the straight top and the tapered bottom.

The 40 oz handled tumbler in two parts

A 40 oz tumbler with a handle steps in near its base, so it takes two wraps: a straight one for the top and a tapered arc for the bottom. Both are here, each sized to its part.

Mug template sizes

Nine ready wraps. Each opens with its size, its print area and the gap at the handle set.

11 oz mug template

The standard mug, 3.2 in across and 3.75 in tall, with an 8.5 × 3.5 in wrap.

15 oz mug

3.4 in across and 4.5 in tall, with a 9 × 4 in wrap.

12 oz enamel mug

3.4 in across and 3.14 in tall, with a short 7.75 × 2.4 in wrap and a wide gap at its handle.

20 oz skinny tumbler

2.9 in across and 8.63 in tall, with a 9.12 × 8.13 in wrap all round.

20 oz tapered tumbler

2.94 in across the top, 2.7 in at the bottom and 8.13 in tall: an arc 5.3° across.

30 oz skinny tumbler

3.17 in across and 9.94 in tall, with a 9.96 × 9.5 in wrap.

30 oz tapered tumbler

3.19 in across the top, 2.94 in at the bottom and 9.37 in tall.

40 oz tumbler top

The straight top of a 40 oz handled tumbler: a 12.57 × 5.81 in wrap.

40 oz tumbler bottom

The tapered bottom part, 3.25 in across at its top and 2.95 in at the base.

What size mug template do I need?

Measure the mug you will press: across the body, outside, and its height. Mugs of the same ounces differ a little from maker to maker, so measure yours or take your blank supplier’s figures, then type them in inches or millimeters.

The table lists every ready mug template with its body, its wrap and the gap at the handle. Print areas for an 11 oz mug run from about 8 to 9 in wide and 3.5 to 3.8 in high, and the 11 oz mug template starts at 8.5 × 3.5 in, the middle of those widths.

Every mug and tumbler, with its wrap.
Mug or tumblerBodyWrapAt the handle
11 oz mug3.2 × 3.75 in8.5 × 3.5 in1.56 in
15 oz mug3.4 × 4.5 in9 × 4 in1.69 in
12 oz enamel mug3.4 × 3.14 in7.75 × 2.4 in2.93 in
20 oz skinny tumbler2.9 × 8.63 in9.12 × 8.13 in·
20 oz tapered tumbler2.94 × 2.7 × 8.13 inAn arc·
30 oz skinny tumbler3.17 × 9.94 in9.96 × 9.5 in·
30 oz tapered tumbler3.19 × 2.94 × 9.37 inAn arc·
40 oz tumbler top4 × 5.81 in12.57 × 5.81 in·
40 oz tumbler bottom3.25 × 2.95 × 3.75 inAn arc·

Why sublimation mug template sizes differ

A mug’s round is π times its width: 10.06 in on a 3.2 in mug. The print can’t reach the handle, and a mug press can’t press right up to it, so the wrap is the round less a strip of about 1.5 to 1.7 in at the handle, roughly half an inch either side of it.

Taller or shorter print areas come from how close a press reaches the rim and the base. The sublimation mug template leaves an even margin at both, and you can type the height and the margin under the rim to match your press.

Coffee mug template: placing your design

The front of a coffee mug template is the middle of the wrap, opposite the handle. A right-handed drinker sees the half on the left of the handle, so put the main picture or words on the front and a second one on each side if you want both hands covered.

Keep text and logos inside the safe area and run your background out to the bleed so the edges stay printed. The 3D view turns the mug, so you can check each side of your mug design template before you print.

Tapered tumblers and the 40 oz tumbler

A tapered tumbler is narrower at the bottom, so it is part of a cone and its wrap unrolls into an arc: the 20 oz tapered tumbler’s is 5.3° across, its top edge as long as the top is round and its bottom edge as the bottom. A rectangle on a tapered tumbler would wrinkle or leave a wedge bare.

The 40 oz handled tumbler narrows sharply near its base, so it takes two wraps, the straight top and the tapered bottom. Print and press them one at a time.

30 oz skinny tumbler9.96 × 9.5 in
30 oz tapered tumbler10 × 9.47 in

The 30 oz tumbler straight and tapered: a rectangle and an arc for nearly the same height.

Enamel mugs and short wraps

An enamel camp mug is short and wide, with a rolled rim and a big handle, so its wrap is short and its gap wide: 7.75 × 2.4 in on the 12 oz enamel mug, leaving 2.93 in at the handle.

Type your own enamel mug’s sizes and the gap and margins update with them.

Front
Back, the handle on the left

The 12 oz enamel mug: a short, wide wrap with a wide gap at its handle.

How to sublimate a mug with this mug template

Print the mirrored PNG on sublimation paper, cut along the line, wrap it round the mug printed side in with its ends either side of the handle, and tape it with heat tape. Press it at your blank’s time and temperature, then peel the paper off while it is warm.

For a tumbler, tape the wrap so its ends meet at the back, and use a shrink wrap sleeve or a tumbler press to keep it tight all round.

Wrap it round and tape it, its ends either side of the handle.

Printing the mug template at home or at a shop

Every mug wrap prints whole on one Letter or A4 page; skinny tumbler wraps print whole on 11 × 17 in or A3, or over two Letter pages to tape together, and the 40 oz top fits Legal. The print shop PDF has a 1/8 in bleed all round the wrap and a safe area.

The PNG comes at 150 or 300 dpi, as is or mirrored, and the SVG cuts the outline on a cutting machine.

0.13 in of bleed all round the wrap.

Is this mug template free?

Yes. Every size, every wrap and every file is free, with no signup and no watermark. Save the mug in this browser, in a project file or in a free account, and come back to change it.

For paper cups and sleeves, the paper cup template and the cup sleeve template work out their arcs the same way.

See your mug in a photo with AI

After a download, the card takes your design to AI mug mockup, which puts it on a mug in a cafe, a kitchen or a studio shot. It uses credits, and you pay only for the pictures you receive.

For a name, a date or a short line, the Design section adds them right on this mug template, and the 3D view wraps them round the mug.

Who uses this mug template

Anyone who prints on mugs and tumblers, from one gift to a shop’s whole range.

Sublimation sellers and crafters

Lay out each design on the sublimation mug template, print it mirrored and press mugs and tumblers that line up every time.

Cafes and small brands

Put your logo on the front of a coffee mug template and check the handle side in 3D before ordering a run.

Gift and event makers

Make named mugs for weddings, teams and birthdays from one 11 oz mug template, changing only the words.

Designers

Hand clients a mug design template with the exact wrap and the gap at the handle, in the size of their blanks.

Mug template FAQ

Quick answers about sizes, the handle, mirroring and printing.

Open the mug template

Is this mug template free?

Yes. Every size, wrap and file is free, with no signup and no watermark.

What size is an 11 oz mug template?

The 11 oz mug template is 8.5 × 3.5 in on a mug 3.2 in across and 3.75 in tall, leaving 1.56 in at the handle. Type your mug’s sizes to change it.

What is the 15 oz mug wrap size?

9 × 4 in on a mug 3.4 in across and 4.5 in tall, leaving 1.69 in at the handle.

Do I need to mirror a sublimation mug template?

Yes, for sublimation transfer paper, which goes on face down. Pick Mirrored when you download the PNG; the PDF and the SVG stay as they are.

Where does the handle go?

At the gap: the wrap’s ends meet either side of the handle, and the middle of the wrap is the front.

Does it work for tumblers?

Yes: 20 and 30 oz skinny tumblers, straight or tapered, and both parts of a 40 oz handled tumbler. A tapered tumbler’s wrap is an arc.

Can I print it on Letter paper?

Every mug wrap prints whole on one Letter or A4 page. Tumbler wraps print whole on 11 × 17 in or A3, or over two Letter pages.

Can I see it on a mug before I print?

Yes. The 3D view wraps your design round the mug with its handle, and after a download AI mug mockup can put it in a photo.

Make your mug template now

Pick a mug or a tumbler, or type your own, and download the mug template as a PNG, a PDF or an SVG.