Sign In

Cup Sleeve Template That Fits Your Cup

Type your cup’s rim, bottom and height, and this cup sleeve template curves the sleeve to the cup’s taper, so it sits flat all the way round at the height you choose.

  • 5 ready sleeves, any cup
  • Fitted or straight
  • Arc and pressed flat sizes
  • Rolls up in 3D

Cup Sleeve Template

Print at 100% and check the 1 in square with a ruler before you cut.

ready sleeves for 8, 12 and 16 oz cups
5
shapes: fitted to the taper or a straight strip
2
Letter page for the 8 oz cup’s sleeve
1
card stock the sleeves are drawn for
80 lb

How to make a cup sleeve template in five steps

Five steps take you from a cup on the table to a sleeve that slides on and stays put.

Start from a template
  • Sleeve for a 12 oz cup3.53 × 2.29 × 4.33 in
  • Sleeve for an 8 oz cup3.13 × 1.98 × 3.66 in
  • Sleeve for a 16 oz cup3.53 × 2.29 × 5.39 in
  • Sleeve for a 12 oz double wall cup3.54 × 2.36 × 4.33 in
  • Straight cup sleeve strip3.53 × 2.29 × 5.39 in

A cup sleeve template made for your cup

Every sleeve here is worked out from your cup, so it slides on, sits flat and shows your artwork all round.

FittedStraight

A fitted sleeve lies on the taper all round; a straight one stands off the cup at its top edge.

Fitted to the cup’s taper

A paper cup narrows toward the bottom, so a sleeve that sits flat is a band of the same cone. It is cut from your cup’s cone a board further out, so it wraps the outside of the cup without a gap.

  • From the rim0.79 in
  • Sleeve height2.17 in

The sleeves for the 8, 12 and 16 oz cups, each in its place.

Placed where you want it

Set the distance from the rim and the height, and the sleeve takes the cup’s size at exactly those heights. Move it down for a tall cup or make it taller for more artwork.

  • Top edge length10.24 in
  • Sleeve pressed flat, top5.12 in
  • Sleeve pressed flat, bottom4.02 in

Round the cup and pressed flat: a sleeve pressed flat is half as wide as it is round.

Arc length and pressed flat width

Sleeve sizes are often given pressed flat, half the way round. The size hint shows both, the length of each edge round the cup and the width pressed flat, so you can match any sleeve you already have.

  • Strip length, without the tab9.46 in
  • Band height on the flat2.26 in
  • Glue tab0.59 in

The straight strip: its length round the cup, its height and its tab.

A straight cupsleeve template for events

Fan and cafe event sleeves are often straight strips. Pick the straight shape for a strip as long as the cup is round at the sleeve’s middle, with the tab on the end.

Front
Back, with the seam

The sleeve rolled up into its ring.

See it on the cup in 3D

The 3D view rolls the sleeve into its ring, with your colors, names and logo from the Design section, so you see the front and the tab before you print.

Cup sleeve template sizes

The 5 ready sleeves and the cups they fit. Open one to move it on the cup, change its height or make it straight.

12 oz cup sleeve template

For a 3.53 in rim cup 4.33 in tall: 2.44 in tall, 0.98 in under the rim.

Sleeve for an 8 oz cup

2.17 in tall on a 3.13 in rim cup, whole on one Letter page.

Sleeve for a 16 oz cup

2.44 in tall on the 5.39 in tall cup, 1.18 in under the rim.

Sleeve for a 12 oz double wall cup

For a 3.54 in rim double wall cup, as a gift or a cafe band.

Straight cupsleeve template

A 9.46 × 2.26 in strip plus its tab, the straight cup sleeve pattern for events.

What size cup sleeve template do I need?

Measure the cup the sleeve goes on: across the rim, outside; across the bottom edge, outside; and the height straight up from the bottom edge to the rim. Cups of the same ounces differ from maker to maker, so measure yours.

The table lists each ready sleeve with its cup, its place on the cup and its flat size. For a cup of your own, type it and the coffee sleeve template follows.

Every ready sleeve: its cup, its place on the cup and its flat size.
SizeCupOn the cupFlat
Sleeve for a 12 oz cup3.53 × 2.29 × 4.33 in0.98 in under the rim, 2.44 in high10.43 × 3.62 in
Sleeve for an 8 oz cup3.13 × 1.98 × 3.66 in0.79 in under the rim, 2.17 in high9.25 × 3.32 in
Sleeve for a 16 oz cup3.53 × 2.29 × 5.39 in1.18 in under the rim, 2.44 in high10.6 × 3.43 in
Sleeve for a 12 oz double wall cup3.54 × 2.36 × 4.33 in0.98 in under the rim, 2.44 in high10.55 × 3.58 in
Straight cup sleeve strip3.53 × 2.29 × 5.39 in1.18 in under the rim, 2.24 in high10.05 × 2.26 in

How a sleeve fits a tapered cup

A paper cup is a slice of a cone, wider at the rim than at the bottom. A sleeve cut as a straight strip stands off the cup at one edge; a sleeve cut from the same cone sits flat on it all the way round, which is why the fitted cup sleeve template is an arc.

The sleeve’s cone is the cup’s with the board’s thickness added, so it wraps the outside of the cup. Its edges go exactly once round the cup at the sleeve’s top and bottom, card included, and the Math tab shows the radii, the angle and every length.

The sleeve is a band of the cup’s cone; unrolled, the band is an arc.

Pressed flat or round the cup

A sleeve pressed flat is half as wide as it is round, so a sleeve listed at about 5 in pressed flat goes round about 10 in. The size hint gives both for the cup sleeve template on your screen, at its top and its bottom.

To match a sleeve you have, press it flat, measure its top edge and type the cup it came on; the coffee cup sleeve template shows the same pressed flat widths.

A cup sleeve pattern for fan events

Cupsleeve events hand out printed sleeves with a fan’s favorite artist, and many of those sleeves are straight strips about 10 in long. Pick the straight cupsleeve template, set its height and add your artwork, names and dates in the Design section.

For a cafe that serves its own cups, the fitted cup sleeve pattern sits flatter; both shapes print on the same pages and cut on the same mat.

The straight strip on A4 turned sideways, inside the page margins.

How to fold and glue a cup sleeve

Cut along the solid line. Roll the sleeve round with the print outside, put glue or double-sided tape on the hatched tab and press it under the other end.

Slide the sleeve onto the cup from the bottom: a fitted sleeve stops where it was made to sit, a board out from the cup.

The sleeve rolls round and its tab goes under the other end.

From the home printer to the print shop

The print PDF prints at actual size with the steps in front: the 8 oz cup’s sleeve on one Letter page, the 12 oz sleeve and the straight strip on one A4 page, every sleeve on Legal, 11 × 17 in or A3, and larger ones over pages to tape together.

The print shop PDF has a 1/8 in bleed following both arcs, a safe area and the tab free of ink. It also downloads as an SVG for a cutting machine, with the arcs as smooth curves, as a DXF and as a PNG; every ready sleeve fits a 12 × 12 in mat.

A print shop’s file: the artwork runs 0.13 in past both arcs and both ends.

Is this cup sleeve template free?

Yes. Every size, both shapes and every file make a free cup sleeve template, with no signup and no watermark. Save the sleeve in this browser, in a project file or in a free account.

For the cup itself, the paper cup template draws the wall from the same three sizes, and the dieline generator draws boxes and bags for the rest of your range.

Design your sleeve with AI

After a download, Design with AI opens AI paper cup design with this sleeve: describe the colors, the pattern and the words, and the design comes laid on the sleeve’s own arc, ready to print.

You pay only for the designs you receive. For a logo, a name or a date, the Design section adds them right on the sleeve, and the 3D view rolls them round with the sleeve.

Who uses this cup sleeve template

Anyone who serves a drink in a paper cup, from one event to a cafe’s daily cups.

Coffee shops and roasters

Print a branded coffee sleeve template for your cups, or send the print shop PDF to a printer for a run.

Fan and cupsleeve events

Make straight or fitted cupsleeve template designs with your artwork, names and dates, and print a stack at home.

Weddings and parties

Dress plain cups with names and colors, and slide the sleeves on as guests arrive.

Designers

Take the exact arc for any cup and place the client’s artwork on the coffee cup sleeve template with bleed and safe area.

Cup sleeve template FAQ

Quick answers about sizes, fitting, printing and gluing.

Open the cup sleeve template

Is this cup sleeve template free?

Yes. Every size, shape and file is free, with no signup and no watermark. Save the sleeve in this browser, in a project file or in a free account.

What sizes does the coffee sleeve template come in?

5 ready sleeves: for 8, 12 and 16 oz hot cups, for a 12 oz double wall cup, and a straight strip. Type any cup in inches or millimeters.

Why is a cup sleeve template curved?

A paper cup narrows toward the bottom, so a sleeve that sits flat is a band of the same cone, an arc on the flat sheet. The straight shape is there for event strips.

Will one sleeve fit all my cups?

A sleeve fits the cup it is drawn for. Cups of the same rim with a different height take a sleeve at another place; type each cup to get its own.

What is a pressed flat width?

The width of a sleeve pressed flat, half the way round. The size hint shows it beside the full length round the cup.

Can I print a cup sleeve template on Letter paper?

The 8 oz cup’s sleeve prints whole on one Letter page. The 12 oz cup’s sleeve and the straight strip print over two Letter pages or whole on one A4 page, and the 16 oz and double wall sleeves over two Letter or A4 pages; every sleeve prints whole on Legal, 11 × 17 in or A3.

What paper should I use?

It starts on 80 lb card stock, which rolls round smoothly and prints at home. 100 lb card is stiffer, and a print shop uses sleeve board.

Can I cut it on a cutting machine?

Yes. The SVG keeps the sleeve as one closed cut line with smooth curves. Every ready sleeve fits a 12 × 12 in mat.

Is there a matching paper cup template?

Yes. The paper cup template draws the cup’s wall from the same rim, bottom and height, so the cup and the cup sleeve template match.

Make your cup sleeve now

Pick a sleeve or type your cup and download the cup sleeve template with its folding steps.